VW Sharan remote programming instructions

Firstly please understand that the remote itself is seperate to the Transponder, you will not be able to program the Transponder chip which is the actual part that immobilises the vehicle, this would need to be done with the appropiate diagnostic device.

The reason i’m sharing these vw Sharan remote programming instructions is because we often get asked how to resynch the remotes to the vehicle after a simple battery change in the remote or after a remote  has been repaired, so i’ve wrote this post to help those who have searched numerous forums only to find or be given the incorrect procedure (this method has been tried and tested many many times) and works!

VW Sharan remote key.

VW Sharan remote key.

I will also point out you must follow the instructions exactly and that the timing is also critical.

Also remember at the key machine,  we can supply, cut and program you a new Volkswagen Sharan remote key, we can do this even if all remotes and keys are lost to the vehicle, we cover all areas of cornwall including Newquay, Penzance, Hayle, St Ives, Redruth, Helston, St Austell, bodmin, truro etc

 

 

[share-locker id=”fb08be28″ theme=”blue” message=”Share or like to reveal instructions!” main_url=”” facebook_share=”1″ facebook_share_title=”” facebook_share_url=”” facebook_share_message=”” facebook_like=”1″ facebook_like_url=”https://www.facebook.com/pages/Key-Machine/292060694196962?ref=ts&fref=ts” facebook_colorscheme=”light” twitter=”1″ twitter_url=”” twitter_tweet=”Check out this post” google=”1″ google_url=”” vk_share=”1″ vk_share_url=””]

Follow Carefully!!

  • Make sure all doors and windows are closed.
  • Turn the key in the drivers door, 3 times to the unlock position for at least half a second and within a total of 5 seconds.
  • The system should now enter programming mode, this is shown by the LED illuminating continuously for the next 15 seconds – during which the key should be programmed as follows.
  • Press one of the buttons on the key and whilst holding it pressed, simultaneously press the other button 3 times.
  • Release both buttons. The key should now flash 5 times and the LED in the door should also flash, 6 times.
[/share-locker]

 

 

If you need more information or want to enquire about any services please feel free to contact us here

ByJohn James

Posted in: Hints and Tips

Leave a Comment (0) ↓